Typical Module Dimension
Type:Counterflow Fill
Materials:PVC
Color Black
Length: 1998mm (n x 55.5mm)
Height: 500 mm up to 1000mm (Fixed).
Width(Stacking): 900mm (n x 18mm)
Working Temperature:
Standard 55℃
High Temperature 75℃
Thinckness before forming: 0.30mm
Sheet Spacing: 18 mm
Emptying factor : >95%
Maximum debris size:22mm
Typical specific weight(0.30 thick): 23kg/m3
Specific heat exchange surface: 140.7m2/m3
Methods or support:Suspended or laid on beams
Maximum total suspended solid:80 ppm
9621 is a counterflow fill, The "CLEANFLOW PLUS " (9621) is the improved technology of the "Cleanflow (9620)" fill by increasing its thermal performance whilst retaining its fouling resistance.
It uses the same smooth horizontal corrugations allowing even water redistribution over the sheet and water rotation for good contact with air whilst resisting deposition of solids. The vertical flute design allows self drainage of the cores and reduces the pressure drop.
The main difference to the Cleanflow fill is the location of the flat and the waved sections on the profile.
It is well adapted to any Induced or Natural draft cooling tower using poor industrial water quality, in particular sea water.
The CLEANFLOW Plus fill has been proving its capability for more than 20 years.
