
Add to Cart
The Fluke 28 II Digital Multimeter is ideal for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. It has IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range and have been designed and tested to withstand a 3 m (10 ft) drop.
Other useful features
For Plant engineer / Industrial electricians (Working with VSD’s) / Users in extreme conditions. Cement Plants, Food Processing, Chemical Processing, Steel Mills and Mining
Includes
Accuracy Specifications | ||
DC voltage | Range | 0.1 mV to 1000 V |
Accuracy | 0.05% + 1 | |
AC voltage | Range | 0.1 mV to 1000 V |
Accuracy | 0.7% + 4 | |
DC current | Range | 0.1 μA to 10 A |
Accuracy | 0.2% + 4 | |
AC current | Range | 0.1 μA to 10 A |
Accuracy | 1.0% + 2 | |
Resistance | Range | 0.1 Ω to 50 MΩ |
Display counts | 6000 | |
Capacitance | 1 nF to 9999 μF | |
Frequency | 0.5 Hz to 199.99 kHz | |
Temperature | -200°C to +1090°C | |
Low pass filter (Measurement on VSD’s) | Yes | |
Compliance | CAT IV 600 V , CAT III 1000 V | |
IP rating | IP 67 | |
Power | Three AA batteries | |
Battery life | 800 hours | |
General Specifications | ||
Display | Bar graph/backlight | Yes/Yes |
Data storage | Peak transient capture | 250 μS |
Min/Max/Avg | Yes | |
Reading hold | Yes | |
Other features | Relative readings (zero) | Yes |
Battery type | Three AA batteries | |
Warranty and protection | Safety rating | CAT IV 600 V/CAT III 1000 V |
Mine safety | MSHA Approved | |
External protection | Rubber holster | |
Drop test | 10 feet drop test | |
Dustproof/waterproof | Yes, IP 67 rated | |
Warranty | Limited lifetime | |
Size (H x W x L) with holster | 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in) | |
Weight with holster | 698.5 g (1.54 lb) |