WUHU WANYI INDUSTRY CO.,LTD
As long as you have a need, I can meet it.
Add to Cart
The 330400-02-00 accelerometer vibration sensor is applied to key machinery that requires measurement of shell acceleration, and is widely used in enterprises such as power plants, refineries, chemical plants, steel plants, water pump plants, and fan plants. Online measurement and protection of the shells of large rotating machinery shafts such as steam turbines, compressors, air compressors, gearboxes, and water pumps
Sensitivity: 10.2 mV/m/s2 (100 mV/g) ± 5%
Frequency response: 10 Hz-15 kHz (600 cpm to 900000 cpm), vibrations above 15 kHz, especially during sensor resonance, will significantly reduce this range.
Base strain sensitivity 49 mm/s2/m series (0.005 g/m series)
Maximum cable length: 305 meters (1000 feet)
Power requirement input voltage: -24 ± 0.5 Vdc
Environmental restrictions
Working and storage temperature -55 ° C to+121 ° C
Protection level: equivalent to IP 68 (dustproof and waterproof). Only applicable to sensors, not applicable to cables.
Weight (without cable): 99g
Diameter: 23mm
Height: 59mm, including installation of bolts.
Connector: 3-pin
Shell material: 316L stainless steel
Installation angle: any direction
330400 accelerometer sensor
330425 accelerometer sensor
Part Number-AA-BB
A: Install threaded joint options
01 ¼ -28 UNFPA stud
02 M8 X 1 stud
B: Agency Approval Option
00 No requirements
05 North American and European approvals (CSA, ATEX, IECEx)
CN China Approval
Common models: 330400-01-00, 330400-01-CN, 330400-02-00, 330400-02-CN
You can use the 3500 framework configuration software to program the 3500/42M to complete the function of vibration speed sensor 30400-02-00, or use vibration monitors 2300/20 and 1900/65A, connection cables 16925 and 16710 for vibration speed sensor 330400-02-00, and three core shielded cables.